ASIC, RTL and VLSI Design Jobs in Japan for Foreign Engineers (2026)
Short answer: Japan's logic design (ASIC/SoC RTL) roles centre on Verilog/SystemVerilog RTL design, verification, synthesis and timing. Most semiconductor jobs at AGG are for Japan residents only, but its logic design role is an exception: it accepts overseas applicants, starts in English, and uses temp-to-hire (up to 6 months of dispatch, then planned direct hire) (as of November 2026).
VLSI design jobs in Japan are front-end chip design roles: you turn a specification into RTL code, check that it works, and help it meet speed, power and area targets. In India this field is usually called "VLSI". In Japanese job ads it is usually called 論理設計 (ronri sekkei, "logic design") or LSI設計 (LSI sekkei, "LSI design").
This guide explains the tasks, the skills employers look for, the language situation, temp-to-hire terms and the visa route if you live outside Japan. All rules are described as of November 2026. This is general information, not legal advice.
Key takeaways
Logic design jobs in Japan cover RTL design, verification, synthesis and static timing analysis (STA), and sometimes DFT.
Employers look at the scope and depth of what you owned, not only years. Full-chip or SoC experience counts most.
Some design teams can start you in English, because design work is internal and EDA tools are in English. Japanese still helps.
Most of AGG's semiconductor jobs are for Japan residents only. The exceptions are the PDK role AGG-J-019 and the logic design role AGG-J-028, which also accept applicants overseas.
From overseas, the usual route is a Certificate of Eligibility (COE), then a visa at a Japanese embassy or consulate.
What do ASIC and RTL design engineers do in Japan?
ASIC and RTL design engineers in Japan design the digital logic of a chip at register-transfer level (RTL) and make sure it can be built. The work is office-based. It is not cleanroom or fab work.
A typical project moves through these stages. One engineer rarely owns all of them, but senior engineers usually understand the whole flow.
Stage | What you do | Common Japanese term |
|---|---|---|
Specification and micro-architecture | Read the performance target, choose data paths, pipelines, memory and bus widths | 仕様策定 (shiyō sakutei), マイクロアーキテクチャ |
RTL design | Write synthesizable Verilog or SystemVerilog for IP blocks or the full SoC | RTL設計, 論理設計 (ronri sekkei) |
Verification | Build testbenches, write assertions, run simulation, check coverage, debug | 論理検証 (ronri kenshō, "logic verification") |
Logic synthesis and STA | Run synthesis, read timing and area reports, fix timing paths, set constraints | 論理合成 (ronri gōsei), タイミング収束 |
DFT (design for test) | Insert scan chains, plan test modes, support ATPG and memory BIST | テスト設計, DFT |
FPGA prototyping and emulation | Map the design to FPGA or an emulator to test with real software | FPGA検証, エミュレーション |
Sign-off support | Support the back-end team with constraints and fixes until tape-out | テープアウト |
Physical design (place and route) and analog design are separate fields. If your work is in process design kits and rule decks, see our guide to PDK engineer jobs in Japan.
RTL design vs verification vs FPGA design
These three are often mixed up on CVs. RTL design means you wrote the logic that goes into the chip. Verification means you proved that someone's logic works. FPGA design means your logic runs on an FPGA, not on a custom chip. ASIC teams in Japan often treat FPGA-only experience as a different job. Write on your CV which of the three you did, for which blocks, and for how long.
What skills do VLSI design jobs in Japan ask for?
VLSI design jobs in Japan usually ask for hands-on RTL work in Verilog or SystemVerilog, plus proof that you understood how your design was synthesized, timed and verified. Japanese teams tend to read your CV line by line against the job description.
Area | Often required | Often helpful |
|---|---|---|
HDL | Synthesizable RTL in Verilog or SystemVerilog | VHDL; high-level synthesis from C/C++ |
Design scope | IP block design, or SoC integration, or ASIC design that reached silicon | Full flow from IP to finished chip |
Verification | Simulation testbenches, debugging waveforms | SystemVerilog assertions, UVM-style testbenches, formal checks, CDC (clock domain crossing) checks |
Synthesis and timing | Reading synthesis and timing reports | Writing timing constraints, PPA (power, performance, area) trade-offs |
Interfaces | On-chip buses and interconnect | DRAM, PCI Express, USB, MIPI, display interfaces |
Scripting | Shell or Python for running flows | Tcl, Perl, C/C++ models |
Tools | Commercial simulators, synthesis and STA tools from major EDA vendors | Emulators, FPGA prototyping boards, Linux |
What "scope and depth" means
Many hiring teams care less about the number of years and more about what you owned. "Designed the DMA controller from specification to tape-out" is stronger than "5 years of RTL experience". Use only your own real facts and numbers, and respect the confidentiality terms of your past employers. Do not name customer projects if your contract forbids it.
Which backgrounds fit
Background | Usual fit | What to show |
|---|---|---|
ASIC/SoC RTL designer at a chip company or design service firm | Strong | Blocks you designed, chips that reached silicon, your role |
Design verification engineer | Medium to strong for verification roles; medium for design roles | Testbench architecture, coverage closure, bugs found |
FPGA engineer only | Usually weak for ASIC roles | Any ASIC synthesis, STA or tape-out work |
Embedded software engineer | Weak for RTL roles | Hardware/software co-design work, if real |
Fresh graduate or research only | Usually weak for senior roles | Tape-out projects, RTL you wrote yourself |
If your background is embedded software rather than chip design, see embedded software jobs in Japan.
Do RTL design jobs in Japan need Japanese?
Some RTL design jobs in Japan can start in English, but many still ask for business-level Japanese. Design work is mostly internal: you work with code, specifications and tools, and EDA tool manuals are in English. This is why some design teams accept English speakers at the start.
Japanese still matters over time. Internal documents, meetings with other teams and reviews may be in Japanese. A common pattern for English-first roles is: start in English, then learn Japanese while working. Check the language line in each job ad. For a wider view, see semiconductor jobs in Japan in English.
About the April 2026 visa change: from April 15, 2026, the Immigration Services Agency (ISA) asks some applicants (employer Category 3 or 4) for proof of CEFR B2-level language ability when the job mainly uses language skills with people, such as translation, interpretation or customer-facing work like a hotel front desk. Logic design is engineering work, not a language job. Your employer's category and the exact job description still matter, so confirm the documents with the employer.
What is temp-to-hire (shokai yotei haken)?
Temp-to-hire, called 紹介予定派遣 (shōkai yotei haken, "dispatch planned to lead to direct hire"), means you first work at a company as a dispatch worker, and then the company can hire you directly. The Ministry of Health, Labour and Welfare (MHLW) states that the dispatch period in this system must not be more than 6 months for the same worker.
Point | Dispatch period | After direct hire |
|---|---|---|
Your employer | The dispatch agency | The company where you work |
Who pays salary and social insurance | The dispatch agency | The company |
Who directs daily work | The company | The company |
Length | Up to 6 months | Decided in the new contract |
Can the company interview you before you start? | Yes, this is allowed in temp-to-hire | Not applicable |
Direct hire is planned, but it is not automatic. The company decides whether to offer, and you decide whether to accept. If the company does not hire you, MHLW guidance says you can ask the dispatch agency for the reason, and the agency must ask the company and pass the reason on to you. For how dispatch compares with regular employment, see seishain vs haken employment types. For normal dispatch rules, see haken dispatch work explained.
Can I get a VLSI design job in Japan from India or another country?
Yes, it is possible, but overseas hiring takes longer, because the visa process usually adds months. At AGG, most semiconductor jobs are only for people who already live in Japan with work authorization. The logic design role below and the PDK Engineer role (AGG-J-019) are the exceptions.
At AGG, the rule is simple (as of November 2026):
Semiconductor jobs: for people who already live in Japan with a status that allows, or can be changed to allow, engineering work.
Exceptions: the PDK Engineer role (AGG-J-019) and the Logic Design Engineer (ASIC/SoC RTL) role, AGG-J-028, also accept applicants who live outside Japan.
Non-semiconductor jobs: also open to overseas applicants. Every job is in Japan, so everyone relocates.
What is the visa route from overseas (COE)?
The usual visa route from overseas is: job offer, then a Certificate of Eligibility (在留資格認定証明書, zairyū shikaku nintei shōmeisho, "COE") applied for in Japan, then a visa at a Japanese embassy or consulate, then entry to Japan. Most logic design engineers work under the Engineer/Specialist in Humanities/International Services status (技術・人文知識・国際業務, "gijinkoku").
Step | What happens | Official facts (as of November 2026) |
|---|---|---|
1. Offer and contract | You agree the terms in writing | — |
2. COE application | The employer's staff in Japan usually applies for you, as your agent | ISA standard processing time: 1 to 3 months; no fee for the COE |
3. COE received | The COE can be sent by email | Electronic COE by email available since March 17, 2023 |
4. Visa application | You apply at the Japanese embassy or consulate in your country | The COE is valid for 3 months; you must apply to land in Japan within that time |
5. Entry and residence card | You arrive and receive a residence card | Gijinkoku periods of stay: 5 years, 3 years, 1 year or 3 months |
6. Start work | Your start date depends on the visa timing | — |
Documents you usually prepare
ISA asks for proof of your education or work history, for example a degree certificate, or employment certificates showing time in related work. Keep your degree certificate, transcripts and past employment letters ready before the offer. A detailed checklist is in our Engineer/Specialist in Humanities visa guide, and the move itself is covered in moving to Japan from India as an engineer.
Dispatch period and your period of stay
ISA states that when you work in dispatch form, the period of stay is decided according to the dispatch contract period. For applications from March 9, 2026, ISA also asks for extra documents for dispatch work, such as pledges and the individual dispatch contract. In a temp-to-hire role, the dispatch part is short (up to 6 months), so your first period of stay may also be short. ISA decides each case. Ask the employer how they plan the visa timing.
When you move to direct hire
When your employer changes from the agency to the company, gijinkoku holders must notify ISA within 14 days of each event: the end of the old contract and the start of the new one. See notifying immigration within 14 days.
What is the salary for RTL design engineers in Japan?
There is no official government salary figure for "RTL design engineer" in Japan. Pay depends on your experience, the employer and the contract type. AGG does not publish salary numbers on job cards; the salary is shared at your first consultation. For official wage statistics and how to compare an offer, read engineer salary in Japan.
How AGG can help
AGG (Awaji Global Gateway, a division of Fukuyoshi Inc.) is licensed in Japan for worker dispatch (派28-301944) and paid job placement (28-ユ-300660). As of November 2026, AGG Careers lists AGG-J-028 Logic Design Engineer (ASIC/SoC RTL) at an advanced semiconductor design company in Japan.
Item | AGG-J-028 (as listed in November 2026) |
|---|---|
Work | RTL design of AI and image processing IP, SoC architecture, micro-architecture, PPA and timing closure, FPGA/emulator verification |
Required | Hands-on RTL design in Verilog or SystemVerilog, and real experience in IP design, SoC architecture or ASIC design |
Strongest fit | About 5 years or more, with IP-to-finished-chip (SoC) experience; FPGA-only or single-area experience is usually not enough |
Language | English is OK when you start; Japanese is not required to apply; AGG gives online Japanese lessons up to about JLPT N3 after you start |
Terms | Temp-to-hire: up to 6 months of dispatch with AGG as your employer, then planned direct full-time employment by the company |
Selection | CV screening, online interview, Verilog RTL coding test, online aptitude test, final interview |
Who can apply | People in Japan and people outside Japan (the one semiconductor exception) |
During the dispatch period, AGG employs you, pays your salary and enrolls you in social insurance. We support the work visa and housing. Direct hire is planned but not guaranteed. AGG charges job seekers no agency fees.
Related guide: temp-to-hire (shokai yotei haken) in Japan: how the move to direct hire works.
Frequently asked questions
Q. Are there VLSI design jobs in Japan for foreigners?
Yes. Japanese chip and design companies hire foreign engineers for RTL design, verification and related roles. Many ads ask for business Japanese, but some teams start engineers in English because design work is internal and EDA tools are in English. Strong, hands-on RTL experience that reached silicon is the main hiring point. In Japanese job ads, look for the words 論理設計 (logic design) or LSI設計.
Q. Can I find RTL design jobs in Japan from India?
It is possible, but fewer roles accept overseas applicants than Japan residents, because the visa adds time. At AGG, semiconductor jobs are for Japan residents only, with two exceptions: the PDK role AGG-J-019 and the logic design role AGG-J-028 also accept applicants living outside Japan. If you are hired from abroad, the employer usually applies for a Certificate of Eligibility, and you then get a visa at a Japanese embassy or consulate. Your start date depends on the visa.
Q. Are there ASIC design jobs in Japan in English?
Some. A few ASIC teams in Japan let you start in English and learn Japanese while working, depending on skills. Internal documents and meetings may still be in Japanese, so learning Japanese helps your long-term career. Read the language line in each job ad. AGG-J-028, for example, is English OK at the start, and AGG offers online Japanese lessons up to about JLPT N3 after you start.
Q. Are there Verilog jobs in Japan?
Yes. Verilog and SystemVerilog are the main languages for RTL design and verification in Japan, as in the rest of the industry. Some employers add a coding test to selection (AGG-J-028 includes a Verilog RTL coding test), so be ready to write clean, synthesizable Verilog and explain your choices. Verilog skills for FPGA work alone are usually seen as a different job from ASIC design.
Q. Is FPGA experience enough for an ASIC design job in Japan?
Usually not on its own. ASIC roles expect you to understand synthesis for a chip process, timing closure, DFT and tape-out, which FPGA work does not fully cover. FPGA experience is still useful for prototyping and verification. If you have both, show clearly which blocks went into a real chip and what you did for them.
Q. What is temp-to-hire in Japan, and is direct hire guaranteed?
Temp-to-hire (紹介予定派遣, shokai yotei haken) means you first work as a dispatch worker, then the company can hire you directly. Under MHLW rules, the dispatch part must not be more than 6 months. Direct hire is planned, not guaranteed: the company decides whether to offer, and you decide whether to accept. If the company does not hire you, you can ask for the reason through the dispatch agency.
Q. Which visa do I need for a logic design job in Japan?
Most logic design engineers work under the Engineer/Specialist in Humanities/International Services status. From overseas, the employer usually applies for a Certificate of Eligibility in Japan. ISA's standard processing time is 1 to 3 months, and the COE is valid for 3 months. If you already live in Japan under another status, such as Researcher or Student, you usually need a change of status before starting.
Q. Does AGG charge fees to apply for design jobs?
No. AGG charges job seekers no agency fees. You can see open roles on the jobs page and apply online. A CV is optional, and AGG replies by email within 3 business days.
Summary
VLSI design jobs in Japan are front-end roles: RTL design, verification, synthesis, STA and sometimes DFT.
Employers value the scope and depth of what you owned, especially work that reached a finished chip.
Some teams start in English; Japanese still helps over time.
Temp-to-hire means up to 6 months of dispatch, then planned (not guaranteed) direct hire.
AGG's semiconductor jobs are for Japan residents only, except the PDK role AGG-J-019 and the logic design role AGG-J-028, which also accept overseas applicants through the COE route.
If you write RTL for ASICs or SoCs, see the Logic Design Engineer (ASIC/SoC RTL) role and our other open engineering jobs, then apply here. A CV is optional, we reply by email within 3 business days, and there are no agency fees. Learn more about our company.
Official sources
Every rule in this guide comes from these official pages (checked November 2026):
ISA — Engineer/Specialist in Humanities/International Services (技術・人文知識・国際業務): activities, periods of stay (5 years, 3 years, 1 year or 3 months), documents, dispatch documents, April 15, 2026 language rule for Category 3/4 (translation, interpretation, customer-facing work).
ISA — Certificate of Eligibility application (在留資格認定証明書交付申請): who can apply, standard processing time 1 to 3 months, no fee, electronic COE from March 17, 2023.
ISA — Immigration Q&A (出入国審査・在留審査Q&A): the COE is valid for 3 months from issue.
ISA — Gijinkoku in dispatch form (申請人が派遣形態で就労する場合の取扱い): period of stay set according to the dispatch contract period; new documents for applications from March 9, 2026 (document updated July 2026).
ISA — Notification of the contracting organization (所属(契約)機関に関する届出): 14-day deadline.
MHLW — What is shokai yotei haken (紹介予定派遣とは): dispatch period of no more than 6 months, pre-dispatch interviews allowed, reason for non-hire given through the dispatch agency on request.
MHLW — Worker dispatch and job placement (労働者派遣事業・職業紹介事業等): hub page for dispatch and placement rules.
Reviewed by
Naoya Mitani — Head of Business Operations, Awaji Global Gateway (Fukuyoshi Inc.). Supports foreign engineers moving into jobs in Japan, including visa changes and onboarding.


